Tee Bee

In addition to the Little Bee you can have the
very stylish TEE BEE now as a building kit
again with a high degree of pre-assembly!

Prototype data

The Tee BEE is fast and easy to assemble
(only 3-5h). It can be dismantled for transport. Equipped with the very efficient and powerful WES-Technik propulsion set No. 2a or 2b the tee Bee has very dynamic flying abilities including aerobatics like turns, loops, ... even in small gymnasiums and halls. After about 25 cm rolling on the runway it climbs nearly vertically. The current needed for an efficient horizontal flight with 2.5m/sec is only 0,3A.

The excellent flying characteristics allow the Tee Bee
more than 20 min. flight with 145mAh LiPoly batteries
at a total mass of only 70gram!

Length	630 mm
Wingspan	860 mm
Wing area	17,5dm²
Total weight	67g with 2cells Kok145
Propulsion	Propulsion 2a Propulsion 2b
Propeller	Carbon Light Prop 23x12 cm or Prop 20x10 cm
Speed controller	JMP HF9 (alt. YGE 6 or YGE 3)
Servos	2 x LS- 2.4 (alt. LS 3.0)
Receiver	R4P-JST
RC-functions	rudder, elevator, speed control