Precision Miniature Ball Bearings

inner diameter outer diameter width Price/ pcs.
1,0 mm 4 mm 1,6 mm 4,85 Euro
1,5 mm 5 mm 2,6 mm 3,85 Euro
2,0 mm 5 mm 2,5 mm 3,40 Euro
2,0 mm 6 mm 2,5 mm 3,40 Euro
2,5 mm 6 mm 2,6 mm 3,40 Euro
3,0 mm 6 mm 2,5 mm 3,40 Euro
3,0 mm 7 mm 3 mm 3,40 Euro
5,0 mm 8 mm 2,5 mm 3,85 Euro

Precision Miniature Ball Bearings with Flange

Ød(mm) ØD(mm) ØF(mm) f (mm) B (mm) Price/ pcs.
1,5 5,0 6,2 0,8 2,6 4,85 Euro
2,0 5,0 6,2 0,6 2,3 4,85 Euro
2,0 6,0 7,2 0,8 3,0 4,85 Euro
2,5 5,0 7,1 0,8 2,6 4,85 Euro
3,0 6,0 7,2 0,6 2,5 4,85 Euro

Lagerzeichnung1.GIF (3163 Byte)

 

Tapered Reamers

The extraordinary precision tool for the model builder at low price.
The fabrication of exact bores (e.g. for exact shaft-fits, drilling pinions,...) is the model builders daily problem and not only while building a RC-Slow Flyer. With our 5-edges, flat tapered precision-reamers you are able to produce bores with an accuracy of 1/1000 mm in no time starting at 0,3mm ! diameter; be it in wood, plastics, aluminum, brass or even if you use them for steel they will have a long durability.

Set of Conical Handreamers 
(6pcs.) Ø0,3 - 1,5mm

12.90 €

 Set of Conical Handreamers 
(6pcs.) Ø2,0 - 6,0mm

 25.90 €

 

Cyano Acrylat CA glue

There are many CA glues available - for immediate and perfect fit we can only recommend the trade name

 DURAX CA

20 g yellow     - thick
20 g white -   medium
20 g red            - thin

    20 g   -  for polystyrene

3.95 Euro/ bottle

   

 

 

 

 

 

 

 

 

Do you sometimes wish to let your bonded joint getting
ready immediatly ? The

DURAX Activatorspray

fits to all DURAX CAs and hardens your adhering within a moment.

 

4.90 Euro/ 150ml can

 

 

Useful Materials for RC-Slow Flyers and more ....


Lightweight wheels for Slow-Flyers

These handmade rubber-tyred two layer balsa wheels weigh a mere of 0,8g. The a plastic hub has an inner diameter of 1mm.

price/ wheel
2.60 Euro

Technical data
Dimensions 39 x 2mm
Mass 0,8 gr

 


High strength Aramid cord

aramid cord Ø 0,35 mm
0.65 Euro/ meter

aramid cord Ø 0,35 mm
0.75 Euro/ meter

   Technical data
Diameter Ø 0,35 mm
Mass 0,1 gr/m
tensile strength

140 N
Diameter Ø 0,5 mm
Mass 0,15 gr/ m
tensile strength

300 N

 

Micro Control-horns


Our superlightweight control horns are CNC precision milled from 0,6mm quality plywood. They are perfect for use in RC-Home-Flyers and other small RC-models. A pushrod end Z made from 0,5mm piano wire fits perfect into the 0.6mm bore of the horns.

Set of 4 pcs.
2,30 Euro

Ruderhorn.gif (10076 Byte)
RH1                                     RH2

 

Micro Heat-Shrink tubes


This very small diameter heat shrink tubes are made from high quality flexible Vinyl, not burning, with smooth surface, extremely resistant. 
Colours: black, red or yellow 
shrinkfactor 2:1 starts shrinking at 135° C, thickness 0,43mm

type dia before
shrinking		 dia after
shrinking		 Price/ pcs. 3m or more 5m or more
LVR 012 1,2 mm 0,6 mm 2,20 Euro 1,50 Euro/m 1,30 Euro/m
LVR 016 1,6 mm 0,8 mm 2,20 Euro 1,50 Euro/m 1,30 Euro/m
LVR 024 2,4 mm 1,2 mm 2,30 Euro 1,60 Euro/m 1,40 Euro/m
LVR 032 3,2 mm 1,6 mm 2,30 Euro 1,60 Euro/m 1,40 Euro/m