Batteries

Dual Lipo charger for 10-150mA

More and more customers need an affordable, simple and convenient charger which recharges smallest LiPo cells of capacities less than 100mAh. The BiCha charges one or two LiPo cells of different capacities fully automatically. It can also recharge Lipoly batteries using the Bahoma* system. Easy to handle Convenient switches specify the charge current,
every 10mA between 10 and 150 mAh.

Power is provided by a built-in battery holder for 4-AA batteries allowing tens of recharges. Alternatively you can supply the BiCha with an external DC or AC wall transformer with 6V output.

Operating voltage:       6 V
Charge capacity:     1 or 2 separate Li-Po cells
Charge current:        10 mA ... 150 A in steps of 10mA
Dimensions approx: 80 x 80 x 40 mm

BiCha LiPo charger

29.90 € / pcs.

LiPo charger 4

Reasonably priced, highly recommended computer-controlled Li-Po fast charger for 1.. 4 Li-Po cells, for use with a 12 V power supply. With 1 .. 3 cells the charger automatically detects the correct number of cells; manual
selection is required with four cells. The unit automatically sets the charge current to suit the cell type connected, while the two LEDs indicate the operating mode. Protected against short-circuit, overload and reversed
polarity for input and output.. Ready to use, maintenance-free.

Operating voltage 11 ... 15 V (12 V car battery, minimum capacity 30 Ah,
                                                  or mains PSU, 12 V / 5 A min.)
Charge capacity      1 ... 4 Li-Po cells
Charge current        100 mA ... 3 A
Dimensions approx. 88 x 55 x 23 mm
Weight approx.         112 g

21.90 € / pcs.

ULTRAMAT 12

A low-cost computer-controlled all-purpose automatic fast charger with programs for discharging, measuring capacity, battery maintenance and pack balancing for most NiCd, NiMH, LiPo and
lead-acid batteries. Can be powered by a 12 V car battery or a 230 V/12 V DC mains PSU.

Simple operation based on clearly arranged program structure, 4-button terminal with user
guidance and monitor dialogue. High-contrast two-line LCD screen displays all relevant parameters simultaneously. Functions can be set to automatic or manual. Delta-Peak cut-off detector for NiCd and NiMH cells; sensitivity can be set separately, ensuring full charges to 100% capacity. Charger
can handle single cells: ideal for glow-start batteries and cell selection processes. Charger can charge 1 ... 3 LiPo cells using the constant current / constant voltage method. Declining curve
after final charge voltage is reached, with automatic charge termination. Lead-acid charge
programs with optimised charge curve, discharge facility, variable discharge current to determine battery capacity and residual capacity.
User settings: this program stores frequently used charge parameters. If the same packs are recharged repeatedly, the charge parameters do not need to be re-programmed. Protected against short-circuit, overload and reversed polarity. Ready to use, maintenance-free.

76.00 € /pcs.

Operating voltage   11 ... 15 V
Charge / discharge facilities.
1 …12 NiCd or NiMH cells.
1 ... 5 LiPo or NiMH cells.
2, 4, 6 and 12 V lead-acid batteries.
Charge current 100 mA ... 3 A.
Discharge current 10 mA… 500 mA.
Dimensions       130 x 113 x 40 mm
Weight approx.   520 g