Propulsion sets

motor Micro DC 5-2.4
+ gear 1:8 or 1:6,7

43.00€/ set

mass 12,2g

propulsion set 1a/ 1b

The 1:8 (1:6,7) propulsion system consist of the motor Micro DC 5-2.4 with a 1:8 (1:6,7) gear and a double ball-beared carbon output drive shaft with Ø2mm. The propulsion is optimised for the Carbon Prop D=23cm; H=12cm (20x10). You can easily change the gear ratio yourself for other prop dimensions subsequently by simply changing the output gear for less than 10.-€.
The gear efficiency of 93% allows a variable propulsion systems with high efficiency.

Motor Micro 4.5-0.6

with gear 1:5

21.00 €/ Set

mass only 7,9 g !!!

Propulsion set11

This propulsion unit has been developed especially for the smallest and lightest models. It consists of the Micro 4.5-0,6 motor with one stage gear 1:5 and a double ball-beared Ø2mm carbon output drive shaft mounted to handmade precision carbonfibre part. This propulsion unit is optimised for our new Carbon Propeller 16/12. The gear efficiency of 93% allows a variable propulsion systems with high efficiency.

Propulsion set2a/2b

Motor Micro DC 5-2.4

with gear 1:9/ 1:6.3

43.50 €/ Set

mass 14 g

These propulsion units consist of the Micro DC5-2.4 motor with the two-stage gear 1:9 or 1:6.3 and a Ø2mm steel output drive shaft. These propulsion units are optimised for the Carbon Propeller 23/12 (20/10). These efficient, quiet propulsion systems come with two M2-screws for proper mount at the front side of the gear box housing.

Propulsion set No. 2
motor Micro DC 5-2.4
+ gear 1:11,8

41.50 €/set

mass 14,2g

The 1:11,8 propulsion set consists of the motor Micro DC 5-2.4 with a 1:11,8 and an nearly in-line output drive shaft with Ø2mm. A compact unit with high efficiency and silent operation. Gear efficiency 81%.
The propulsion system is optimised for our Prop 26x12.

Propulsion Sets No. 3, 4, 5
No.3	No.4	No.5
DC 1717	DC 1624	DC 1524
Gear ratio 1:11,8/ 1:6,3			These power propulsion sets consist of the motors Micro DC 1717, 1624 or 1524 with a 1:11,8/ 1:6,3 and an in-line output drive shaft with Ø2mm. Compact units with silent operation. Gear efficiency is 81%. These propulsion systems are optimised for our Carbon Props 28x12cm/ 26x12cm (1:11,8) and 20/10cm (1:6.3)
20,6g	24,5g	24,5g
38.00 €	35.00 €	42.00 €

These are the ultimate, compact power units for the Little Bee or WESPE. These highly efficient propulsion systems
are also best suited for bigger and heavier Slow/Park –Flyers like Ikarus Blériot or Simprop Taube ....